Curriculum  
Nata a Catania il 10 Gennaio 1979.  
Nel 2002 (24 Ottobre) si laurea in Ingegneria Civile indirizzo Strutture presso la Facoltà di Ingegneria dell’Università degli Studi di Catania con la votazione di 110/110 e lode, discutendo la tesi “Applicabilità di analisi approssimate nella progettazione sismica di edifici asimmetrici con irregolarità in altezza”, relatori il Prof. A. Ghersi e l’ing. E.M. Marino.  
Nel 2002 si abilita alla professione di ingegnere. Il 7 gennaio del 2003 si iscrive all’Ordine degli Ingegneri della Provincia di Catania.  
Nel 2003 è vincitrice del concorso per l’assegnazione di borsa di studio triennale per il Dottorato di Ricerca in Ingegneria delle Strutture (XVIII ciclo), presso l’Università di Catania.  
Nel 2003 è nominata Cultore della Materia di Tecnica delle Costruzioni, presso la Facoltà di Ingegneria dell’Università degli Studi di Catania  
Nel 2006 (esame finale 11 aprile) consegue il titolo di Dottore di Ricerca in Ingegneria delle Strutture discutendo la tesi “Progetto di sistemi duali con controventi eccentrici in zona sismica”, supervisore il Prof. A. Ghersi.  
Dal febbraio 2009 al gennaio 2013 è assegnista di ricerca per settore scientifico disciplinare ICAR 09 con programma di ricerca: "Comportamento sismico di edifici esistenti con struttura in c.a”  
Da giugno 2014 a Dicembre 2016 è assegnista di ricerca per settore scientifico disciplinare ICAR 09 con programma di ricerca dal titolo: “Criteri di progetto e fattori di struttura per telai controventati in acciaio” (attività sospesa da gennaio 2015 ad agosto 2015 per missione all’estero)  
Dal 12 Gennaio 2015 al 10 agosto 2015 ricopre il ruolo di Research Associate presso “Department of Building, Civil and Environmental Engineering”, Concordia University Montreal (Canada).  
Dal 31/03/2017 abilitata alle funzioni di professore di II fascia (Abilitazione Scientifica Nazionale 2016-2018 - I quadrimestre).  
Dal 01/09/2018 al 31/08/2021 Ricercatore a Tempo Determinato di tipo B presso il DICAR (sede di Catania).  
Dal 01/09/2021 Professore Associato presso il DICAR (sede di Catania).  
   
Attività didattica  
Docente a contratto per l'insegnamento di Teorie e Tecniche Costruttive nel loro Sviluppo Storico (a.a. 2008/2009). Modulo del Laboratorio di Costruzione dell’Architettura II  per il corso di Laurea Specialistica quinquennale in Architettura, Facoltà di Architettura dell’Università degli Studi di Catania (sede di Siracusa).  
Docente a contratto per l'insegnamento di Progetto di Strutture  (a.a. 2009/2010).  Modulo del Laboratorio di Costruzione dell’Architettura II  per il corso di Laurea Specialistica quinquennale in Architettura, Facoltà di Architettura dell’Università degli Studi di Catania (sede di Siracusa).  
Docente a contratto per l'insegnamento di Laboratorio di Tecnica delle costruzioni (a.a. 2016/2017). Corso di Laurea Magistrale a ciclo unico In Ingegneria Edile-Architettura  dell’Università degli Studi di Catania.  
Docente a contratto per l'insegnamento di Tecnica delle costruzioni nel Laboratorio di Tecnica delle Costruzioni (canale M-Z) (a.a. 2017/2018). Corso di Laurea magistrale a ciclo unico in Architettura dell’Università degli Studi di Catania (sede di Siracusa).  
Docente a contratto per l'insegnamento di Tecnica delle costruzioni mod B (a.a. 2017/2018). Corso di Laurea magistrale in Ingegneria Civile Strutturale e Geotecnica dell'Università degli Studi di Catania.  
Docente per l'insegnamento di Tecnica delle costruzioni mod B. Corso di Laurea magistrale in Ingegneria Civile Strutturale e Geotecnica dell'Università degli Studi di Catania (a.a. 2018/2019- a.a.2020-21).  
Docente a contratto per l'insegnamento di Tecnica delle costruzioni nel Laboratorio di Tecnica delle Costruzioni (canale M-Z).  Corso di Laurea magistrale a ciclo unico in Architettura dell’Università degli Studi di Catania, sede di Siracusa (a.a. 2018/2019- a.a.2020-21).  
Relatrice o Correlatrice di 78 tesi di laurea su svariati argomenti di ingegneria strutturale.  
Docente in corsi di formazione professionale e seminari sulle normative europee (Eurocodici) relative alle costruzioni in cemento armato (Eurocodice 2) ed alle costruzioni in acciaio e cemento armato in zona sismica (Eurocodice 8)  
   
Pubblicazioni Principali  
Autrice di 127 pubblicazioni.  
   
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Proposal and validation of a design procedure for concentrically braced frames in the chevron configuration. Earthquake Engineering and Structural Dynamics (2021), 50: 3041–3063  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Seismic performance and cost comparative analysis of steel braced frames designed in the framework of EC8. Engineering Structures (2021), 240: Article 112379, ISSN: 0141-0296  
F. Barbagallo, M. Bosco, A. Ghersi, E.M. Marino. An over-damped multimodal adaptive nonlinear static analysis for seismic assessment of infilled RC buildings. Engineering Structures (2020), 229: Article 111622, ISSN: 0141-0296  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Variable vs. invariable elastic response spectrum shapes: impact on the mean annual frequency of exceedance of limit states. Engineering Structures (2020), 214: Article 110620, ISSN: 0141-0296, https://doi.org/10.1016/j.engstruct.2020.110620  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. On the fibre modelling of beams in RC framed buildings with rigid diaphragm. Bulletin of earthquake engineering (2020), 18(1): 189–210 ISSN 1570-761X, DOI 10.1007/s10518-019-00723-z  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Seismic design and performance of dual structures with BRBs and semi-rigid connections. Journal of Constructional Steel Research (2019), 158: 306–316, ISSN: 0143-974X, https://doi.org/10.1016/j.jcsr.2019.03.030  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Achieving a more effective concentric braced frame by the double-stage yield BRB. Engineering Structures (2019), 186: 484–497, ISSN: 0141-0296. https://doi.org/10.1016/j.engstruct.2019.02.028.  
M. Bosco, E.M. Marino, P.P. Rossi. A design procedure for pin-supported rocking buckling-restrained braced frames. Earthquake Engineering and Structural Dynamics (2018), 47(14): 2840-2863. Print ISSN: 0098-8847, Online ISSN: 1096-9845, DOI: 10.1002/eqe.3112.  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. Seismic retrofitting of braced frame buildings by RC rocking walls and viscous dampers. Earthquake Engineering and Structural Dynamics (2018), 47(13) :2682–2707. Print ISSN: 0098-8847, Online ISSN: 1096-9845, DOI: 10.1002/eqe.2846.  
M. Bosco, A. Ghersi, E. Marino, P.P. Rossi. Generalized corrective eccentricities for nonlinear static analysis of buildings with framed or braced structure. Bulletin of Earthquake Engineering (2017), 15:4887–4913, ISSN: 1570-761X (print version) ISSN: 1573-1456 (electronic version), DOI: 10.1007/s10518-017-0159-x  
M. Bosco, G. Brandonisio, E. Marino, E. Mele, A. De Luca. Ω* method: an alternative to Eurocode8 procedure for seismic design of X-CBFs. Journal of Constructional Steel Research,(2017), 134: 135147, ISSN:0143-974X, http://dx.doi.org/10.1016/j.jcsr.2017.03.014  
M. Bosco, L. Tirca. Numerical Simulation of Steel I-Shaped Beam Using Fiber-Based Damage Accumulation Model. Journal of Constructional Steel Research (2017), 133: 241–255, ISSN:0143-974X, DOI: 10.1016/j.jcsr.2017.02.020  
F. Barbagallo, M. Bosco, E.M. Marino, P.P. Rossi. P.Stramondo. A multi-performance design method for seismic upgrading of existing RC frames by BRBs. Earthquake Engineering and Structural Dynamics (Version of Record online: 29 NOV 2016, DOI: 10.1002/eqe.2846)  
M. Bosco, E.M. Marino, P.P. Rossi. A design procedure for dual eccentrically braced-moment resisting frames in the framework of Eurocode 8. Engineering Structures (2017), 130: 198–215, ISSN: 0141-0296- http://dx.doi.org/10.1016/j.engstruct.2016.09.059  
M. Bosco, E.M. Marino, P.P. Rossi. Influence of modelling of steel link beams on the seismic response of EBFs. Engineering Structures (2016), 127: 459–474, ISSN:0141-0296. http://dx.doi.org/10.1016/ j.engstruct.2016.08.062  
M. Bosco, E. Ferrara, A. Ghersi, E.M. Marino, P.P. Rossi. Improvement over the model proposed by Menegotto and Pinto for steel. Engineering Structures (2016), 124: 442–456, ISSN:0141-0296. http://dx.doi.org/10.1016/j.engstruct.2016.06.037  
M. Bosco, A. Ghersi, E.M. Marino, P.P. Rossi. Importance of link models in the assessment of the seismic response of multi-storey EBFs designed by EC8. Ingegneria Sismica, International journal of earthquake engineering 2016, 3 (Special issue CTA 2015): 82-93, ISSN: 0393-1420  
M. Bosco, G.A.F. Ferrara, A. Ghersi, E.M. Marino, P.P. Rossi. Predicting displacement demand of multi-storey asymmetric buildings by nonlinear static analysis and corrective eccentricities. Engineering Structures (2015), 99: 373–387, ISSN:0141-0296. doi:10.1016/j.engstruct.2015.05.006.  
M. Bosco, E.M. Marino, P.P. Rossi. Critical review of the EC8 design provisions for buildings with eccentric braces. Earthquakes and Structures (2015), 8(6): 1407-1433, ISSN:2092-7614. DOI : 10.12989/eas.2015.8.6.1407  
M. Bosco, E.M. Marino, P.P. Rossi. Design of steel frames equipped with BRBs in the framework of Eurocode 8. Journal of Constructional Steel Research (2015), 113:43–57, ISSN:0143-974X. doi:10.1016/j.jcsr.2015.05.016  
M. Bosco, G.A.F. Ferrara, A. Ghersi, E.M. Marino, P.P. Rossi. Seismic assessment of existing r.c. framed structures with in-plan irregularity by nonlinear static methods. Earthquakes and Structures (2015), 8(2):401-422, ISSN: 2092-7614. DOI : 10.12989/eas.2015.8.2.401  
M. Bosco, E.M. Marino, P.P. Rossi. Modelling of steel link beams of short, intermediate or long length. Engineering Structures (2015), 84:406–418, ISSN: 0141-0296. doi:10.1016/j.engstruct.2014.12.003.  
M. Bosco, E.M. Marino, P.P. Rossi. Proposal of modifications to the design provisions of Eurocode 8 for buildings with split K eccentric braces. Engineering Structures (2014), 61:209–223, doi:10.1016/j.engstruct.2013.07.022  
F. Amara, M. Bosco, E.M. Marino, P.P. Rossi. An accurate strength amplification factor for the design of SDOF systems with P-Δ effects. Earthquake Engineering and Structural Dynamic (2014), 43:589–611 DOI: 10.1002/eqe.2361  
M. Bosco, A. Ghersi, E.M. Marino, P.P. Rossi. A Capacity Design Procedure for Columns of Steel Structures with Diagonals Braces. The Open Construction and Building Technology Journal 2014, 8 (Suppl 1: M2): 196-207, ISSN:1874-8368  
M. Bosco, P.P. Rossi. A design procedure for dual eccentrically braced systems: Analytical formulation. Journal of Constructional Steel Research (2013), 80: 440–452, doi: 10.1016/j.jcsr.2012.09.019  
M. Bosco, P.P. Rossi. A design procedure for dual eccentrically braced systems: Numerical investigation. Journal of Constructional Steel Research (2013), 80: 453–464, doi: 10.1016/j.jcsr.2012.08.003  
M. Bosco, E.M. Marino. Design method and behaviour factor for steel frames with buckling restrained braces. Earthquake Engineering and Structural Dynamics (2013), 42: 1243–1263, doi: 10.1002/eqe.2269  
M. Bosco, E.M. Marino, P.P. Rossi. An analytical method for the evaluation of the in-plan irregularity of non-regularly asymmetric buildings. Bulletin of Earthquake Engineering (2013), 11: 1423-1445, doi 10.1007/s10518-013-9438-3  
M. Bosco, A. Ghersi, E.M. Marino, P.P. Rossi. Comparison of nonlinear static methods for the assessment of asymmetric buildings. Bulletin of Earthquake Engineering (2013), 11:2287–2308, doi 10.1007/s10518-013-9516-6  
M. Bosco, A. Ghersi, E.M. Marino, P.P. Rossi. Prediction of the Seismic Response of Steel Frames with Concentric Diagonal Bracings. The Open Construction and Building Technology Journal (2013), 7:118-128  
M. Bosco, A.Ghersi, E.M. Marino. Corrective Eccentricities for assessment by the nonlinear static method of 3D structures subjected to bidirectional ground motions. Earthquake Engineering and Structural Dynamics (2012), 41: 1751-1773, doi: 10.1002/eqe.2155  
M. Bosco, P.P. Rossi. Seismic behaviour of eccentrically braced frames. Engineering Structures (2009), 31: 664-674. doi:10.1016/j.engstruct.2008.11.002.  
M. Bosco, A.Ghersi, E.M. Marino. On the Evaluation of Seismic Response of Structures by Nonlinear Static Analysis. Earthquake Engineering and Structural Dynamics (2009), 38(13): 1465-1482.doi:10.1002/eqe.911